What to do if the internal temperature of my VDH Heinen & Hopman FC500-PC Marine Equipment is above 70°C?
If the internal temperature of your VDH Marine Equipment exceeds 70°C, allow the unit to cool down and ensure better ventilation.
What to do if my VDH Heinen & Hopman FC500-PC shows an internal over voltage alarm?
If your VDH Marine Equipment displays an internal over voltage alarm, remove the power supply and then reconnect it. If the problem goes away, no further action is needed. However, if the problem persists, the unit may be defective.
General| Brand | VDH |
|---|---|
| Model | Heinen & Hopman FC500-PC |
| Category | Marine Equipment |
| Language | English |
Precautions against electric shock, fire hazards, and personal injury during use.
Further safety measures for transportation, installation, and environmental factors.
Information on power terminal layout, supply connections, and grounding.
Configuration and connection details for the RS485-NET interface.
Connection and configuration for RS485-DIS for local display units.
Step-by-step guide to enter parameter mode and view/change settings.
Identification of error codes E1-E4, PU1-PU3, Vu1-Vu2, PC2, and Et4.
Step-by-step solutions to resolve common error codes encountered with the FC500-PC.
To Next Page