By its modular design and custom-tailored front
panel, the electronic speedometer 1323 can be inte-
grated harmoniously into present and future cockpit
systems.
The electronic speedometer 1323 provides the
required display of the speed either Stand alone or in
combination with the radio-format tachograph MTCO
or DTCO.
Used stand alone the electronic speedometer 1323
is directly connected to the speed sensor. In combi-
nation with the tachograph the K-Line or the CAN-
interface are used.
The microprocessor and modern stepper motor
technology form the basis for the precise speed indi-
cation and odometer. The accurate data recording
and indication meet the stringent requirements of
national and EU-wide regulations.
Features
• Indication of total distance travelled in the 7-digit
LC display with 100 meter digit
• Speed pointer set to the legally required tolerance
• Optional display of daily kilometres and time with
setting knob
• Custom-tailored design for pointers, dial and front
frame as an option
• Outputs for v-signal, 4 imp/m, driving and stop
signal for stand alone version
• Communication with tachograph via K-Line or CAN
Application
• Vehicles subject to tachograph regulations with
seperate indication and recording
• Vehicles not subject to tachograph regulation
• Replace KTCO in combination with MTCO or DTCO
www.vdo.com
Electronic Speedometer
1323
To Next Page
Need help?
General
