Vdwall LVP615 series Quick User Guide

地址：深圳市南山区科技园北区同方信息港 C 栋 5B 网址：www.videowall.cn
电话：
+86-755-2675 0210
传真：
+86-755-2675 0185
LVP615 系列快速使用指南
Input： HDMI
In status： 1080p_60Hz
--------------------------------------
Output size： 1920x1080
Output start： （0，0）
--------------------------------------
Switch mode： one key SW
Switch time： 1.5sec
Step 5 ： output resolution setup
When turn on LVP615,
1) Press Setup key，then press knob （OK），LVP615 enter setup menu and press ↑,↓ to select
corresponding setup menu. Press knob（OK） to enter. Press back to last item. Rotate
knob to select language“中文”or “English”and press OK to save.
2) Enter setup menu：1.out image

1.1 resolution， and rotate knob to change output resolution.
Select output resolution which is bigger than LED real resolution and press OK to save.
3) Processor will restart automatically to apply for new output resolution.
Step 6 ： output image width and height setup
After LVP615 restart
1) Press Setup，then press OK to enter setup menu 1.out image

1.2out width，rotate knob
to change the output width value to the actual pixel value of LED screen and press OK to save.
2) Then press ↓ enter 1.3 out height ，and rotate OK to change the output height value to the
actual pixel value of LED screen. Press OK to save.
3) Press to exit setup menu.
Step 7 ： computer resolution setup
1) Enter computer graphic card control interface, In setting up multiple monitors, select mode

Vdwall LVP615 series Specifications

General

Brand	Vdwall
Model	LVP615 series
Category	Processor
Language	English