LVP615 series user manual
7
Note : EXT.input standard is 1* VIDEO, optional
1*SDI/HD-SDI/3G-SDI or 1* VGA/DVI/HDMI port.
2) Audio input signals(AUDIO)
LVP615 supports 5-channel stereo audio inputs switching. Of
which, 3 channels are DP, HDMI and SDI input. The other 2
channels are AD1, AD2 external audio input. AD1 and AD2 can be
mapped to any one of signal inputs, and will be switched
synchronous to the selection of video input signals.
1-channel analog RGBHV signal output,
which can be connected to a local display
device for monitoring (it is strongly
recommended to use this port when
operating and setting LVP615).
2 same DVI digital graphic signal output,
it can be connected to external 2 LED
transmission cards or LED transmission
boxes.
1-channel digital video signal loop
output(Only available when the extended
input port is SDI/HDSDI /3G-SDI)
1-channel computer DVI digital signal
loop output
TCP/IP local area network control