IX-4
2. Enter
the
number 1
[RETURNl
The screen will display:
SELECT THE DESTINATION DRIVE [AJ, [BJ, [C] :
3. (The
actual
drive selection will
reflect
your system configuration). Enter
the
letter
for the drive
to
which you will copy
the
operating
system.
The screen will display:
INSERT
DESTINATION DISKETTE AND
PRESS
THE
[RETURN]
KEY
WHEN
READY:
4. You
can
use
the
same
physical
drive
for
both
destination
and source
diskettes. Press
[RETURN]
when you
have
inserted
and mounted
the
diskette in the drive. The screen will display:
DO YOU
WANT
THE
VECTOR
SYSTEM
AND
LIST
DEVICE
FILES
COPIED'!
[Y]
OR
[N]:
Enter
Y
if
you intend
to
boot
from the newly-generated system diskette.
If
you
enterN,
you will not be able to use the diskette for booting.
S.
The screen will display:
INSERT
SOURCE
DISKETTE AND PRESS
THE
[RETURN]
KEY
WHEN
READY:
Remove
the
destination
diskette
from
the
drive
and insert the system
diskette.
Press [RETURN]. The drive will make a
"clicking"
sound
for
several seconds. Then the screen will display:
INSERT
DESTINATION DISKETTE AND
PRESS
THE
[RETURN]
KEY
WHEN
READY:
6. Again, remove the diskette
from
the drive and insert the backup diskette.
When
you press [RETURN], the
drive
will
click
again.
The
screen
will
display:
VECTOLCPM
FILE
COPIED TO DESTINATION DRIVE
VECTOLLDI
FILE COPffiD
TO
DESTINATION DRIVE
VECTOLLD2 FILE
COPmD
TO DESTINATION DRIVE
7.
If
you have a floppy-only system, the screen will prompt
you
to:
INSERT
SOURCE DISKETTE AND
PRESS
THE
[RETURN]
KEY
WHEN
READY:
7100-0001 2-01-83 - Rev. B
To Next Page
Loading...