Vector Graphic Vector 4 - Page 193

DISKETI'ES
CARE AND HANDLING OF DISKETTES
Type Of Diskettes
All Vector 4 systems with floppy drives require an industry-standard 5-1/4"
floppy diskette with
16 "hard sectors". This means that there are 16 sector
guide holes around the center drive hole. These sector guide holes help the
computer align itself for reading from and writing
to the disk.
Rev. A - 9-01-82 7100-0001
Write-Protect Notch
Center Drive Hole
Sector Guide Hole
Recording Media
X C-l