Vector Graphic Vector 4 - Page 77

VECTOR 4 USER'S MANUAL
QUICK REFERENCE INDEX
QUICK REFERENCE INDEX TO VECTOR 4 COMMANDS
Bettini tIp Your S$rtem
To Do This...
Boot from floppy disk
Boot from hard disk
Repeat system testing
NOTE: The above commands apply to system
that has been recently powered or reset.
Select single- or double-sided configuration for
floppy drives
(Permits multiple
lOZical configurations for each
physical floppy drive)
Set up disk or diskette for operation:
Options (may be used together) are:
E Report
any errors found on the disk
surface.
R Repeat formatting (used for
formatting several diskettes, such as
a
new box, in succession).
P Format hard disk (where appplicable).
CAUTION; This grQiram erases all information
trom disk.
Use oMz if no valuable jnformatiQD
is stored OD disk tQ be fQrmatted.
Rev. A -
09-01-82
7100-0001
Enter This...
F
w
T
CONFIG F
FORMAT <options}
V 1-1