Vector 4 - Page 161

VECTOR GRAPHIC, INC.
When the last key (the [SPACE] bar) is pressed, the screen will clear and
prompt for:
VECTOR GRAPHIC KEYBOARD TEST - VERSION 1.X
SELECT: [1] TEST ALL PHYSICAL CODES
[2] PRINT PHYSICAL CODE FOR SINGLE KEY
SELECT OPERATIONAL MODE FROM ABOVE:
Press [RETURN] (or any Key other than 1 or 2, followed by a [RETURN]) to
exit to CP/M.
4.5 Print Test
4,6.1 Purpose Of Test
The PRINTEST program tests five different functions of printers attached to
the Vector 4: skewed ASCII, horizontal positioning, vertical positioning,
boldface type, and backward printing. Each of these tests checks out a
different possible malfunction of either serial or parallel printers attached to
the Vector 4.
4.6.2 Procedure For Using Print Test
If testing letter-quality printer, make sure that you have a nonproportional
daisywheel or thimble in your printer. Also, be sure to run CONFIG to select
and attach the printer you will be testing.
Enter PRINTEST [RETURN]. The screen will display:
VECTOR GRAPHIC DAISYWHEEL PRINTER TEST. VERSION 1.0
DO YOU HAVE A PARALLEL PRINTER? (Y/N)
Enter [Y] to test the Vector 7700. The screen will display:
12 CHARACTERS PER INCH? (Y/N)
Enter [Y]L The screen will display:
LINE LENGTH? (MAX. =158)
Enter the number of characters which will fit on the paper in the printer, up
to 158, The screen wil prompt you for:
NUMBER OF LINES? (MAX. =95)
I 4-6 7200-0001 09-01-82