Vector 4 - Page 3

Warning: This equipment generates, uses, and can radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against such interference
when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference in
which case the user, at his own expense, will be required to take whatever
measures may be required to correct the interference.
Copyright 1982 by Vector Graphic Inc.
All rights reserved.
Disclaimer
Vector Graphic makes no representations or warranties with respect to the contents
of this manual itself, whether or not the product it describes is covered by a
warranty or repair agreement. Further, Vector Graphic reserves the right to revise
this publication and to make changes from time to time in the content hereof
without obligation of Vector Graphie to notify any person of such revision or
changes, except when an agreement to the contrary exists.
Revisions
The date and revision of each page herein appears at the bottom of each page.
The revision letter such as A or B changes if the MANUAL has been improved but
the PRODUCT itself has not been significantly modified. The date and revision on
the Title Page corresponds to that of the page most recently revised. When the
product itself is modified significantly, the product will get a new revision number,
as shown on the manual's title page, and the manual will revert to revision A, as if
it were treating a brand new product. EACH MANUAL SHOULD ONLY BE USED
WITH THE PRODUCT IDENTIFIED ON THE TITLE PAGE.
Additional Manuals
For additional copies of the VECTOR 4 - TECHNICAL INFORMATION MANUAL
order part number: 7200-0001
ii