EasyManua.ls Logo

Vector VEC280 User Manual

Vector VEC280
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
8
3. If you suspect a bulb is blown, check the bulb filament. If filament is coiled and
unbroken, the bulb is not blown. If filament is blown, replace bulb.
4. If you suspect the main fuse is blown, check it and, if necessary, replace with a
new 20 amp spade fuse.
SPECIFICATIONS
Spotlight: 12 volt H3, 25 watt bulb
Batteries: Two maintenance-free, sealed lead acid,
6 volt, 4.5 Ah
AC Adapter: 1000mA, 12 volt high frequency charger
Operating Voltage: 12 volts DC
VEC280
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
Rechargeable
Inflator/Spotlight
High Pressure/High Volume Inflator Combo
with 12 Volt DC Portable Power Supply
www.vectormfg.com
VEC280_Manual_110405 11/4/05 12:09 PM Page 8
Question and Answer IconNeed help?

Do you have a question about the Vector VEC280 and is the answer not in the manual?

Vector VEC280 Specifications

General IconGeneral
TypeLED Spotlight
Color Temperature6000K
Weight1.4 kg
IP RatingIP65
Power SourceAC
MaterialAluminum
Beam Angle120 degrees

Summary

One Year Limited Warranty Program

Important Safety Instructions

Introduction

Features

AC and DC Charging/Recharging

Viewing Battery Charge Status

Displays battery level using LED indicators.

120 Volt AC Charging/Recharging

How to charge the unit using the built-in 120V AC adapter.

12 Volt DC Charging/Recharging

How to charge the unit using a vehicle's 12V DC outlet.

Using the Spotlight

Using the Air Compressor/Inflator

Inflating Products With a Valve Stem Using the Compressor

Procedure for inflating items with standard valve stems.

Inflating Products Without a Valve Stem Using the Compressor

Procedure for inflating items using adapters without valve stems.

Using the Inflator/Deflator

Care and Maintenance

Replacement Parts

Information on obtaining replacement parts for the unit.

Bulb Replacement

Step-by-step guide for replacing the spotlight bulb.

Battery Replacement/Disposal

Instructions for battery service and proper disposal.

DC Plug Fuse Replacement

Procedure for replacing the fuse in the DC charging adapter.

Troubleshooting

Operating Issues

Common operational problems and their solutions.

Related product manuals