Need help?Do you have a question about the Vectra Fitness C-1 and is the answer not in the manual?
General| Brand | Vectra Fitness |
|---|---|
| Model | C-1 |
| Category | Home Gym |
| Language | English |
Inspect cables and their nylon jackets regularly for wear and damage to prevent breakage.
Keep clear of moving parts, ensure pins and locks are engaged, and handle weights safely.
Prevent children from using or playing with the machine; older children require adult supervision.
Perform checks on cables, bolts, accessory items, selector pin, and grips for wear or tightness.
Illustrates pulley numbering for easy cable installation and routing guidance.
Choose a well-lit, ventilated area and protect the floor; ensure access to all sides during assembly.
Assemble the lower foot and high pulley member to the main frame, routing the first cable.
Attach the press station frame member and the press adjustment plate assembly to the main frame.
Assemble the butterfly station frame member to the main frame and attach the butterfly arms.
Install guide rods, rubber bumper, and load weight plates; assemble selector shaft and cable connector.
Install butterfly cams and arms, ensuring proper engagement of the ratcheting mechanism.
Attach the butterfly seat bottom, seat back, and arm pads to the frame.
Assemble lat hold downs, noting different height options for user preference.
Install rear shrouds and position the main unit for use.
Connect cable ends to cams, secure with plugs, and adjust cable system tension using the adjustable pulley.
Install bench cushions, foot, and leg developer; adjust bench pivot for stability.
Review safety rules, exercise chart, and machine labels before beginning use.
To Next Page