BEFORE FIRST USE
EN
24
Correct placement of iron on the thermal insulation
stand
When the iron is put on the thermal insulation stand,
it must be placed on it correctly (see Fig.3).
1. Remove any sticker or protective foil from the
soleplate.
2. Iron a piece of damp cloth under the maximum
temperature for several minutes for the purpose of
removing any residue on the soleplate according to
the section of “Steam ironing”.
Note: It is normal that strange odor comes out from
the unit for the first use. This will cease after a short
while.
Note: Some particles may come out of the soleplate
when you use the iron for the first time. This is
normal; the particles are harmless and stop coming
out of the iron after a short while.
Note: After you switch on the appliance, the water
pump in the unit base may produce a sound when
spraying steam.
Note: During the heating process of the soleplate,
there will be little water coming out from the
Fig.3
Correct placement
Wrong placement
+
-
+
-
+
-
To Next Page
Loading...