8Copyright ©2023 Veeniix All Rights Reserved.
6.Pairing & Calibration
Please pairing the remote controller and complete the compass
calibration according to the following operations.
Please pay attention to the order of operation and the standardization
of action.
Turn on the aircraft→Turn on
the remote controller → Push
up and pull down the left
joystick.
After successful pairing, enter
the APP for compass calibration.
In the process of calibration, the
aircraft needs to keep 3 turns
horizontally until prompted for
the next step of calibration.
If the operation sequence is
incorrect, the pairing will fails.
Tilt rotation of aircraft will
increase the number of
calibration cycles or calibration
failure.
Remote Controller
Pairing
Compass Calibration
Operation procedure
Cautious
To Next Page
Loading...