Veer CRUISER - Attaching Infant Car Seat to Adapter; Removing Infant Car Seat Adapter from Cruiser

Rotate the latches downward into place until the green zone on
each grey locking button becomes clearly visible (g 3). Your
adapter is correctly installed only when the green zone on each grey
locking button is visible. If the green zone is not visible, your
adapter is NOT CORRECTLY INSTALLED (g 4). Repeat on other
side.
02.
Installing the Infant Car Seat to Adapter
(Never Attach with Infant in Seat)
Lower the infant seat down into the adapter until you hear a loud
“SNAP” signifying the infant seat is completely installed (g 1).
Ensure each car seat latch is properly engaged by lifting up on infant
seat to verify proper and complete attachment.
Seat is now ready for Infant.
03.
Removing Infant Car Seat Adapter
from Cruiser
Depress the grey locking button on each tower and rotate the
attachment levers outward (Fig 1). Lift away from frame and store
safely for later use (Fig 2).
Fig 1
Fig 1 Fig 2
Fig 3 Fig 4
INCORRECT!
No Green Visible
CORRECT!
Green Zone Visible
!