Vega PEL-4 - Appendix A.3 Factory Default Reset Commands

To Next Page

To Previous Page

Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018

PEL-4 Precision LED Sector Light Page 42 of 69 Manual Version V1.06

Appendix A.3 Factory Default Reset Commands

The following commands reset multiple beacon settings to nominal values. Several

alternative commands are provided for convenience, allowing a beacon to be set to one of

several nominal operational types. For a particular factory reset programming code, the

beacon is programmed with the settings in the same row as the code.

Factory Default Reset

Commands

Programming

Code

Reset

Variant

Reset Effects

1-5-999

<FDF>999/

Oscillating

Boundary

12V Battery

Thresholds

 Default (Night & Day) Fixed Character (1-0-000)

 Night intensity is set to maximum intensity

 Day intensity is set to maximum intensity

 Master sync & zero sync delay set (1-3-000)

 IALA day/night thresholds (1-4-005)

 Normal, Automatic Best Effort Mode (1-5-002)

 Standard sync behaviour (1-7-999, 1-7-002)

 Low and high battery thresholds reset to 12V

nominal. These should be reviewed by the user

and adjusted for the supply voltage if

necessary.

 Default Effective Intensity Flash Mode & Single

Flash Character Modes (7-2-000)

 Auto-storage and calendar modes are disabled.

 Oscillating boundary detection and alarm

function are enabled.

 Remote control and traffic light modes are

disabled.

1-5-998

<FDF>998/

Fixed