EasyManua.ls Logo

Vega PEL-4 - APPENDIX D SPECIFICATIONS OF PEL-4

Vega PEL-4
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018
PEL-4 Precision LED Sector Light Page 53 of 69 Manual Version V1.06
APPENDIX D SPECIFICATIONS OF PEL-4
Optics
Light Source
High-Intensity Light-Emitting Diode
Colours Available
Red, Green, White
Intensity
See Appendix B
Colour Boundary Precision PEL-4: typ. 1’ of arc (0.017 degrees)
Effective intensity settings
Programmable in 1 Candela steps for the ranges shown in Appendix B.
Peak Intensity
Effective Intensity (default IALA E-200-4 2017 or alternative IALA E-200-4
2008 flash compensation) and Peak Intensity (no compensation)
programming options.
Flash Characters
246 standard characters plus one custom character
20 factory set custom characters if required
Horizontal Subtense PEL-4-3D5: 3.5°
PEL-4-5D: 5.0°
PEL-4-10D: 10.0°
Vertical divergence PEL-4-3D5: 2.6°
PEL-4-5D: 3.75°
PEL-4-10D: 6.7°
Chromaticity Co-ordinates
Red IALA E-200-1 Red Temporary Region
White IALA E-200-1 White Optimum Region
Green IALA E-200-1 Green Optimum Region
Synchronisation
Hard-wired sync is standard, delay up to 9.9 seconds in 0.1 second steps.
Electrical
Voltage
Nominal 12VDC and 24VDC; operating range 10VDC to 30.0VDC, inclusive.
Absolute max input voltage 35.0VDC.
Programmable low voltage cut off threshold
Light on current
See Appendix B
Current between flashes
See Appendix B
Oscillating boundary motor current See Appendix B
Day / Night transition
Photo sensor projecting from mainframe. Twelve program settings for the
day/night transition. Accuracy of sensor ±20 lux
Reverse Polarity
Internally protected against reverse polarity connection
Material for Projector
Lenses
Glass objective; Acrylic condenser
Housing
Marine grade metals
Finish
Two-pot, three-coat epoxy primers and paint
Sealing
O-rings
Mounting Bolts
Three M12 bolts or studs
Environmental
Operating Temperature
Specified operation over -30°C to +50°C,
Safe operation over -30°C to +85°C
Thermal Protection LED intensity reduced above 50°C
Salt
Rated for continuous exposure to salt water and spray
Cooling
Natural convection
Immersion
IP 67 rating, 30 minutes immersion at 1 metre head of water
Programming
Vega Remote02 Infra-Red programmer & RS232 Serial Interface

Table of Contents

Related product manuals