Vega POINTRAC 31 - Setup with PACTware; 8.1 Connect the PC

44
8 Setup with PACTware
POINTRAC 31 • 8/16 mA/HART - four-wire
43388-EN-180322
8 Setup with PACTware
8.1 Connect the PC
2
1
3
Fig. 17: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT 4
3 Sensor
Information:
The interface adapter VEGACONNECT 3 is not suitable for connec-
tion to the sensor.
1
5
2 4
3
OPEN
TWIST
USB
LOCK
Fig. 18: Connecting the PC via HART to the signal cable
1 POINTRAC 31
2 HARTresistance250Ω(optionaldependingonevaluation)
3 Connection cable with 2 mm pins and terminals
4 Processing system/PLC/Voltage supply
5 Voltage supply
Necessary components:
•
POINTRAC 31
•
PC with PACTware and suitable VEGA DTM
•
VEGACONNECT 4
•
HARTresistanceapprox.250Ω
Via the interface adapter
directly on the sensor
Connection via HART