Vega VEGADIF 85 - Measurement Setups

18
6 Set up with smartphone/tablet, PC/notebook via Bluetooth
VEGADIF 85 • Probus PA
53575-EN-230814
6 Set up with smartphone/tablet, PC/
notebook via Bluetooth
6.1 Preparations
Make sure that the Bluetooth function of the display and adjustment
module is activated. For this, the switch on the bottom side must be
set to " On".
1
On
O
Fig. 8: Activate Bluetooth
1 Switch
On = Bluetooth active
O = Bluetooth not active
The security concept of Bluetooth operation absolutely requires that
the default setting of the sensor PIN be changed. This prevents unau-
thorized access to the sensor.
The default setting of the sensor PIN is " 0000". First of all you have
to change the sensor PIN in the adjustment menu of the sensor, e.g.
to " 1111":
1. Go to setup via the extended operation
2. Lock operation by changing sensor PIN
3. Enable operation by entering the sensor PIN once more
Activate Bluetooth
Change sensor PIN