Vega VEGAFLEX 62 - Table of Contents

Contents
1 About this document
1.1 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
1.2 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
1.3 Symbolism used. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
2 For your safety
2.1 Authorised personnel . . . . . . . . . . . . . . . . . . . . . . . .
5
2.2 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
2.3 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . .
5
2.4 General safety instructions . . . . . . . . . . . . . . . . . . . .
5
2.5 Safety label on the instrument . . . . . . . . . . . . . . . . . .
6
2.6 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
2.7 Fulfillment of NAMUR recommendations . . . . . . . . . .
6
2.8 Safety instructions for Ex areas . . . . . . . . . . . . . . . . .
6
2.9 Environmental instructions. . . . . . . . . . . . . . . . . . . . .
6
3 Product description
3.1 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
3.2 Principle of operation . . . . . . . . . . . . . . . . . . . . . . . .
8
3.3 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
3.4 Packaging, transport and storage . . . . . . . . . . . . . . .
9
4 Mounting
4.1 General instructions . . . . . . . . . . . . . . . . . . . . . . . . .
11
4.2 Mounting instructions . . . . . . . . . . . . . . . . . . . . . . . .
12
5 Connect to power supply
5.1 Preparing the connection . . . . . . . . . . . . . . . . . . . . .
20
5.2 Connection procedure . . . . . . . . . . . . . . . . . . . . . . . .
21
5.3 Wiring plan, single chamber housing . . . . . . . . . . . . .
22
5.4 Wiring plan, double chamber housing . . . . . . . . . . . .
23
5.5 Wiring plan double chamber housing Ex d . . . . . . . . .
25
5.6 Wiring plan - version IP 66/IP 68, 1 bar . . . . . . . . . . .
27
6 Set up with the indicating and adjustment module PLICSCOM
6.1 Short description . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
6.2 Insert indicating and adjustment module. . . . . . . . . . .
28
6.3 Adjustment system . . . . . . . . . . . . . . . . . . . . . . . . . .
30
6.4 Setup procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
6.5 Menu schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
6.6 Saving the parameter adjustment data . . . . . . . . . . . .
40
7 Setup with PACTware and other adjustment programs
7.1 Connecting the PC . . . . . . . . . . . . . . . . . . . . . . . . . .
41
7.2 Parameter adjustment with PACTware . . . . . . . . . . . .
42
7.3 Parameter adjustment with AMS™ and PDM . . . . . . .
43
7.4 Saving the parameter adjustment data . . . . . . . . . . . .
43
2 VEGAFLEX 62 • 4 … 20 mA/HART two-wire
Contents
31837-EN-090831