Vega VEGAFLEX 81 - Page 35

35
6 Set up the sensor with the display and adjustment module
VEGAFLEX 81 • Modbus and Levelmaster protocol
42283-EN-140430
+ h
D
- h
Fig. 19: Vessel height und socket correction value
D Vessel height
+h Positive socket correction value
-h Negative socket correction value
Since scaling is very extensive, scaling of the level value was divided
into two menu items.
In menu item "Level 1"youdenethescalingvariableandthescaling
unit for the level value on the display, e.g. volume in l.
Setup - Scaling Level
Setup - Scaling Level 1