Vega VEGAFLEX 81 - Page 40

40
6 Set up the sensor with the display and adjustment module
VEGAFLEX 81 • Modbus and Levelmaster protocol
42283-EN-140430
The submenu points described below.
This menu item enables the setting of the requested national lan-
guage.
In the delivery status, the sensor is set to the ordered national lan-
guage.
Inthismenuitem,youdenetheindicationofthemeasuredvalue
onthedisplay.Youcandisplaytwodierentmeasuredvalues.Inthis
menuitem,youdenemeasuredvalue1.
The default setting for the displayed value 1 is "Filling height Level".
Inthismenuitem,youdenetheindicationofthemeasuredvalue
onthedisplay.Youcandisplaytwodierentmeasuredvalues.Inthis
menuitem,youdenemeasuredvalue2.
The default setting for the displayed value 2 is the electronics tem-
perature.
The optionally integrated background lighting can be adjusted via the
adjustment menu. The function depends on the height of the supply
voltage, see "Technicaldata".
Thelightingisswitchedoindeliverystatus.
In this menu item, the device status is displayed.
Display - Menu language
Display - Displayed value
1
Display - Displayed value
2
Display - Backlight
Diagnostics - Device
status