Vega VEGAFLEX 86 - Setup with PACTware; Connect the PC; Parameter adjustment with PACTware

55
7 Setup with PACTware
VEGAFLEX 86 • Probus PA
44232-EN-160518
7 Setup with PACTware
7.1 Connect the PC
3
1
2
Fig.29:ConnectionofthePCdirectlytothesensorviatheinterfaceadapter
1 USBcabletothePC
2 InterfaceadapterVEGACONNECT
3 Sensor
7.2 Parameter adjustment with PACTware
For parameter adjustment of the sensor via a Windows PC, the con-
guration software PACTware and a suitable instrument driver (DTM)
according to FDT standard are required. The up-to-date PACTware
version as well as all available DTMs are compiled in a DTM Collec-
tion. The DTMs can also be integrated into other frame applications
according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older rmware versions. You can download
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
Further setup steps are described in the operating instructions manu-
al "
DTMCollection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descrip-
tions are available in the online help of PACTware and the DTMs.
Via the interface adapter
directly on the sensor
Prer
equisites