Vega VEGAFLEX 86 - Set up with the quick setup

57
7 Setup with PACTware
VEGAFLEX 86 • Probus PA
44232-EN-160518
Fig. 31: Select quick setup
1 Quick setup
2 Extendedadjustment
3 Maintenance
Quick setup
With quick setup you can carry out the parameter adjustment of
VEGAFLEX 86 for your application in just a few simple steps. The
assistant-driven adjustment includes the basic settings for simple,
reliable setup and commissioning.
Information:
If the function is inactive, then possibly no instrument is connected.
Check the connection to the instrument.
Extended adjustment
With the extended adjustment, you carry out the parameter adjust-
ment for the instrument via the clear menu structure in the DTM
(Device Type Manager). This enables additional and special settings
over and above those oered by quick setup.
Maintenance
Under the menu item "Maintenance" you get comprehensive and
important support for servicing and maintenance. You can call up
diagnostic functions and carry out an electronics exchange or a
software update.
Click to the button "Quick setup", to start the assistant-driven adjust-
ment for a simplied and reliable setup.
Start quick setup