Vega VEGAFLEX 86 - Supplement; Technical data

75
11 Supplement
VEGAFLEX 86 • Probus PA
44232-EN-160518
11 Supplement
11.1 Technical data
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process tting - rod version 316L, Alloy C22 (2.4602) and Aluminium oxide-ceramic
99.7 % (Al
2
O
3
) or Alloy C22 (2.4602) and Aluminium
oxide-ceramic 99.7 % (Al
2
O
3
)
Ʋ Process tting - cable version 316L and Aluminium oxide-ceramic 99.7 % (Al
2
O
3
)
Ʋ Process seal on the instrument side
(cable/rod leadthrough)
Aluminium oxide-ceramic 99.7 % (Al
2
O
3
) and graphite
Ʋ Rod: ø 16 mm (0.63 in) 316L or Alloy C22 (2.4602)
Ʋ Cable: ø 2 mm (0.079 in) 316 (1.4401)
Ʋ Cable: ø 4 mm (0.157 in) 316 (1.4401)
Ʋ Gravity weight (optionally available) 316L
Ʋ Centering weight (optionally available) 316L
Ʋ Process seal On site
Materials, non-wetted parts
Ʋ Plastic housing plastic PBT (Polyester)
Ʋ Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
Ʋ Stainless steel housing - precision
casting
316L
Ʋ Stainless steel housing, electropol-
ished
316L
Ʋ Second Line of Defense Borosilicate glass GPC 540
Ʋ Seal between housing and housing lid Silicone SI 850 R, NBR silicone-free
Ʋ Inspection window in housing cover
(optional)
Polycarbonate (with Ex d version: glass)
Ʋ Ground terminal 316L
Ʋ Cable gland PA, stainless steel, brass
Ʋ Sealing, cable gland NBR
Ʋ Blind plug, cable gland PA
Second Line of Defense
Ʋ The Second Line of Defense (SLOD)
is a second level of the process
separation in the form of a gas-tight
feedthrough in the lower part of the
housing, preventing product from
penetrating into the housing.
Ʋ Supporting material 316L
Ʋ Glass potting Borosilicate glass GPC 540