Vega VEGAMET 141 - Application Area, Use In Gas And Dust Atmospheres; Area Of Applicability; Device Configuration;-Properties; General Information

11
VEGAMET 141, 142 • Installation in non-Ex area
63696-01-201218
1 Areaofapplicability
These safety instructions apply to the devices:
•
VEGAMET 141
•
VEGAMET 142
In accordance with the EU type approval certicate DEMKO 20 ATEX 2383 X, as associated equip-
ment (certicate number on type plate) and for all devices with safety instruction 63696.
The classication as well as the respective standards are stated in the above certicates:
Type of protection marking:
•
II (1) G [Ex ia Ga] IIC
•
II (1) D [Ex ia Da] IIIC
2 Deviceconguration/-properties
The detailed device congurations can be retrieved using the serial number search on our home-
page.
Move to " www.vega.com" and enter in the search eld the serial number of your instrument.
Alternatively, you can nd all via your smartphone:
•
Download the VEGA Tools app from the " Apple App Store", " Google Play Store" or "
Baidu Store"
•
Scan the DataMatrix code on the type label of the instrument or
•
Enter the serial number manually in the app
3 General information
The single and double channel controllers VEGAMET 141, 142 are ideal for simple control tasks
in all industrial areas for non-Ex or Ex applications for the connection of one or two 4 … 20 mA
sensors.
They serve as a display for continuous sensors and can also be used as a (Ex)power supply unit for
the connected sensors.
The setting can be easily done on site using manual operation or remotely using smartphone/tablet
and PC/Laptop using Bluetooth Smart.
There are no other interfaces on the controllers. The devices can be used in the switching cabinet.
The operating instructions as well as the installation regulations or standards that apply for explosi-
on protection of electrical systems must generally be observed.
The installation of explosion-protected systems must always be carried out by qualied personnel.
4 Applicationarea,useingasanddustatmospheres
Associatedapparatus
The VEGAMET 141, 142 may be installed and operated outside of hazardous areas as associated
equipment.
5 Specicconditionsofuseforsafeoperatingmode
The following overview is listing all special properties of VEGAMET 141, 142, which make a label-
ling with the symbol "X" behind the certicate number necessary.
Mountingoptions
The VEGAMET 141, 142 must be mounted vertically.
ATEX