Vega VEGAMET 341 - Switch-On Phase

14
5 Connecting to power supply
VEGAMET 341 • 4 … 20 mA
63730-EN-210616
The Ex separating chamber must be mounted before setting up the
Ex versions of VEGAMET 341.
1
Fig. 6: Mounting the Ex-separating chamber
1 Ex separating chamber
5.5 Switch-on phase
Afterswitchingon,thedevicerstcarriesoutashortself-check.
•
Internal check of the electronics
•
Output signals are set to failure, background lighting of the display
lights red
The current measured values are then displayed and transmitted to
the outputs. The background lighting of the display changes to white.
Ex separating
chamber