Then the current measured values will be displayed and outputted.
The measured value indication shows the digital indication value, the
measurement loop designation (measurement loop TAG) and the unit.
An analogue bar graph can also be blended in. If flow measurement is
activated, an additional indication window with totalizer is available. By
pushing the [>] key you can move between the different indication
options.
à By pushing [OK], you move from the measured value indication
into the main menu. Here, you have the choice between the setup
assistant for the most important settings or the complete classical
menu.
At the beginning of every setup or parameter adjustment, you have the
choice of continuing with the setup assistant or the classic menu
guidance. We recommend using the setup assistant for the initial
setup. If later on individual settings should be corrected or added, the
most expedient way to do this is via the classic menus.
à Select the menu item "Setup assistant" with [->] and confirm with
[OK].
The setup assistant leads you step-by-step throught the standard
settings. All steps must be passed completely, it is not possible to
interrupt the procedure. Following the individiual steps which can be
passed through with the assistant:
l Device-TAG (individually adjustable instrument name)
l Measurement loop TAG (individually adjustable measurement
loop designation)
l Type of input (4 … 20 mA or HART)
l Measured variable (for example level or process pressure)
l Adjustment unit (for example m or bar)
l Min./Max. adjustment
l Activation of the fail safe relay
l Configuration of the relay outputs (e.g. setup of pump control or
overfill protection)
l Adjustment date/time
l Network settings with option "Ethernet interface"
Measured value indica-
tion
Main menu/Setup assis-
tant
Setup assistant
18 VEGAMET 391 • 4 … 20 mA/HART signal conditioning instrument
6 Setup with the integrated indicating and adjustment unit
36032-EN-091116
To Next Page
Loading...