19
7MeasuredvalueenquiryviaWebbrowser/http
RS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C62
30325-EN-130701
5. Enterhereanindividualpasswordforyourconnection.Thispass-
wordmustbeusedlateronforthedial-upconnection.
6. EnterthepreferredIPaddress.Ingeneralyoucanusethestand-
ardsetting"192.168.200.200".
7. Enteranindividualnameintheprovidedeld.
Create a dial-up connection on the PC
Firstofallcreateadial-upconnection.UnderWindows2000/Xpthere
isthe"Assistentfornewconnection"whichyoucanreachvia"Start-
Settings-Networkconnection".Proceedinthewayyouarecreating
aconnectiontotheInternetviamodem.EnterunderCallnumber
thetelephonenumberofthelocalmodem.EnterunderUsername/
Passwordthespecicationsalreadyusedforthesignalconditioning
instrument.Adjustaxbaudrateof9600.
Nowstartyourdial-upconnectionandestablishthecommunicationto
thesignalconditioninginstrument.
Openthewebbrowser(e.g.InternetExplorer)andentertheprevi-
ouslydenedIPaddressintheeldcalled"Address"or"URL".Now
theHTMLchartgeneratedinthesignalconditioninginstrumentis
nowdisplayedwithallmeasuredvalueinyourbrowserwindow.
Fig. 7: Measured value indication by means of Internet Explorer
7.5 Measured value enquiry via http software
Toenquiremeasuredvalueles,anindividualhttpcapablesoftware
canbeused.WithExcel,themeasuredvaluescanbereadoutauto-
maticallye.g.inanindividualintervalandsavedaschart.Dierentfor-
matsofthemeasuredvalueandstatuslesareavailable.Adetailed
descriptionoftheseletypesisavailableinchapter"Measured value/
Status les".
•
SignalconditioninginstrumentwithEthernetinterface
Password/Password
IP address
Host name
Measured value indica-
tion
Prerequisites