Vega VEGAMET 624 - 3 Product Description; Configuration

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l VEGAMET 624 signal conditioning instrument
l Terminal socket
l Coded pins and bridges
l RS232 modem connection cable (optional)
l Documentation
- this operating instructions manual
- Supplementary instruction 30325 "RS232/Ethernet connec-
tion" (optional)
- Supplementary instructions manual 30768 "Modbus-TCP,
VEGA ASCII protocol" (optional)
- Ex-specific "Safety instructions" (with Ex-versions)
- if necessary, further certificates
VEGAMET 624 consists of the components:
l VEGAMET 624 signal conditioning instrument with indicating and
adjustment unit in the front
l Terminal socket
VEGAMET
1 2 3 4
9 10 11 12
17 18 20 21 22
5 6 7 8
13 14 15 16
23 24 25 26 27 28
Ser. No.
12345678
on
OK ESC
COM
3
2
1
2
3
4
1
6
5
Fig. 1: VEGAMET 624
1 Ex separating chamber with Ex version
2 VEGAMET 624
3 Indicating and adjustment unit
4 Communication interface for VEGACONNECT (I²C)
5 RS232 or Ethernet interface (optional)
6 Terminal socket
The type label contains the most important data for identification and
use of the instrument:
l Article number
l Serial number
l Technical data
Scope of delivery
Components
Type label
VEGAMET 624 • 4 … 20 mA/HART signal conditioning instrument 7
3 Product description
28969-EN-091116