Vega VEGAPULS 31 - Available Product Accessories

11
3 Product description
VEGAPULS 31 • Two-wire 4 … 20 mA/HART
57820-EN-191014
3.5 Accessories
The instructions for the listed accessories can be found in the down-
load area on our homepage.
Screwedangesareavailableindierentversionsaccordingtothe
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
Welded sockets are used to connect the sensors to the process.
Threaded adapters enable simple adaptation of sensors with stand-
ardthreadedttings,e.g.toprocess-sidehygieneconnections.
The mounting accessories include e.g. bracket and mounting bracket
and are used for stable mounting of the sensor at the measuring
point. The parts are available in various versions and sizes.
Flanges
Welded sockets and
adapters
Mounting accessories