Vega VEGAPULS 6X - Page 39

39
5 Mounting
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
Fig. 39: Installation and orientation in multiple chamber silos
To avoid heavy buildup and dust on the antenna, the device should
not be mounted close to the dust exhauster inside the vessel.
To protect the device against buildup, particularly in case of strong
condensation, air rinsing is recommended.
Plastic horn antenna:
The VEGAPULS 6X with plastic horn antenna is optionally available
witharinsingairconnection.Themechanicalcongurationdiers
accordingtotheangeversion,seefollowinggraphics.
1
Fig.40:Plastichornantennawithcompressionange
1 Rinsing air connection
Dust deposits - Rinsing
air connection