Vega VEGAPULS 6X - VEGA Tools app and PACTware;DTM

94
12 Menu overview
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
Diagnostics
Menu item Parameter Selection/Display Default setting
Diagnosis status Diagnosis status Diagnosis status -
Change counter -
Checksum (CRC) current Date parameter ad-
justment
Checksum (CRC) last SIL locking Date last SIL locking
Echo curve Echo curve Indication of echo
curve
Peak indicator Distance Current value, min. distance, max. distance Actual value
Measurement reli-
ability
Current value, min. measurement reliability,
max. measurement reliability
Actual value
Measuring rate Current value, min. meas. rate, max. meas.
rate
Actual value
Electronics temper-
ature
Current value, min. eletronics temperature,
max. electronics temperature
Actual value
Operating voltage Current value, min. voltage supply, max.
voltage supply
Actual value
Diagnostic behaviour Behaviour with echo
loss
Last measured value, maintenance mes-
sage, fault signal
Last measured value
Time until fault signal Time until fault signal
Sensor information Device name, serial number, hardware/
software version, device revision, factory
calibration date
-
Sensor character-
istics
Congurationfea-
tures
Simulation Measured value Percent,linearizedpercent,llingheight,
distance, scaled, measurement reliabili-
ty, electronics temperature, measuring rate,
operating voltage, current output, current
output 2
Percent
Device memory Echo curve of the
setup
Save echo curve of setup -
Echo curve memory Echo curve memory
12.2 VEGA Tools app and PACTware/DTM
Lock/Unlock adjustment
Menu item Parameter Selection Default setting
Lock/Unlock adjust-
ment
Lock, unlock Released