3
-50°C
(-58°F)
50°C
(122°F)
40°C
(104°F)
-40°C
(-40°F)
80°C
(176°F)
0°C
(32°F)
100°C
(212°F)
150°C
(302°F)
200°C
(392°F)
250°C
(482°F)
Fig. 49: Ambient temperature - Process temperature
1 Process temperature
2 Ambient temperature
3 Temperature range with temperature adapter
Density
Ʋ Standard sensitivity > 0.03 g/cm³ (0.0011 lbs/in³)
Ʋ High sensitivity > 0.02 g/cm³ (0.0007 lbs/in³)
Granularsize no limitation
3)
Electromechanical data - version IP 66/IP 67 and IP 66/IP 68; 0.2 bar
Cable entry/plug
4)
Ʋ Single chamber housing – 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm), 1 x
blind plug M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
– 1␣xplug(dependingontheversion),1␣xblindstopper
M20␣x␣1.5
Spring-loaded terminals
for wire cross-section up to 1.5 mm² (AWG 16)
Electromechanical data - version IP 66/IP 68 (1 bar)
Cable entry
Ʋ Single chamber housing – 1xIP68cableglandM20x1.5;1xblindplug
M20 x 1.5
or:
– 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
Connection cable
Ʋ Wire cross-section > 0.5 mm² (AWG 20)
Ʋ Wire resistance <0.036Ω/m(0.011Ω/ft)
Ʋ Tensile strength <1200N(270lbf)
Ʋ Standard length 5 m (16.4 ft)
Ʋ Max. length 1000 m (3280 ft)
3)
Max.20mm(0.8in)withproductdensity<0.03g/cm³(0.0011lbs/in³).
4)
Depending on the version M12 x 1, according to ISO 4400, Harting, 7/8" FF.