Vega VEGAVIB 61 - 2.5 Safety label on the instrument; 2.6 EU conformity; 2.7 SIL conformity; 2.8 Safety instructions for Ex areas

6
2 For your safety
VEGAVIB 61 • Two-wire 8/16 mA
29268-EN-170315
2.5 Safety label on the instrument
The safety approval markings and safety tips on the device must be
observed.
2.6 EU conformity
ThedevicefullsthelegalrequirementsoftheapplicableEUguide-
lines.ByaxingtheCEmarking,weconrmsuccessfultestingofthe
product.
YoucanndtheEUconformitydeclarationonourwebsiteunder
www.vega.com/downloads.
2.7 SIL conformity
VEGAVIB 61 meets the requirements of functional safety according
to IEC 61508. Further information is available in the Safety Manual
"VEGAVIB series 60".
2.8 Safety instructions for Ex areas
PleasenotetheEx-specicsafetyinformationforinstallationandop-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.
2.9 Environmental instructions
Protection of the environment is one of our most important duties.
That is why we have introduced an environment management system
with the goal of continuously improving company environmental pro-
tection.Theenvironmentmanagementsystemiscertiedaccording
to DIN EN ISO 14001.
Pleasehelpusfullthisobligationbyobservingtheenvironmental
instructions in this manual:
•
Chapter "Packaging, transport and storage"
•
Chapter "Disposal"