To Next PageTo Next Page
Need help?Do you have a question about the Vehicletool Mini VAG505A and is the answer not in the manual?
General| Brand | Vehicletool |
|---|---|
| Model | Mini VAG505A |
| Category | Diagnostic Equipment |
| Language | English |
Details the location of the vehicle's 16-pin Data Link Connector (DLC) for connection.
Describes the compatibility and capabilities of the diagnostic tool with car brands.
Lists the primary diagnostic functions offered by the tool, such as fault codes and basic settings.
Outlines the vehicle systems that the diagnostic tool can interact with, like Engine and ABS.
Details advanced functions like Oil Reset, Airbag Reset, and Odometer adjustments.
Highlights key characteristics such as power, function scope, and ease of use.
Provides a visual guide and explanation of the tool's physical components and buttons.
Details the operational temperature range and external power requirements of the diagnostic tool.
Step-by-step guide for connecting the diagnostic tool to the vehicle's OBDII port.
Initiates the diagnostic process by selecting the 'Diagnosis' option from the main menu.
Guides the user to select the appropriate vehicle control unit for diagnosis.
Allows selection of specific vehicle systems (e.g., Engine, ABS) for detailed diagnosis.
Details the process of establishing communication between the scan tool and the vehicle's ECU.
Accesses the main function menu after successful ECU connection.
Retrieves and displays the version information of the vehicle's ECU.
Scans and displays diagnostic trouble codes (DTCs) from the vehicle's ECU.
Procedure for clearing diagnostic trouble codes and its implications.
Displays live sensor data and parameters from the vehicle's ECU.
Performs tests on specific vehicle components like the tachometer.
Enables calibration and adjustment of vehicle control modules.
Allows adjustment and saving of specific parameter values for vehicle components.
Procedure for inputting and writing software or equipment coding information.
Accesses secure areas of the vehicle's ECU using PIN or SKC.
Checks the readiness status of various vehicle emission control systems.
Retrieves advanced identification details of the vehicle's control units.
Resets the engine oil service interval indicator.
Resets the Supplemental Restraint System (SRS) or airbag warning light.
Adjusts or resets the vehicle's odometer reading.
Specific Oil Reset procedure for older Audi 2.0T models with LED indicators.
Oil Reset procedure for Audi 2.0T models with LED indicators, including service interval.
Performs minor service interval resets for new Volkswagen Audi models.
Performs major service interval resets for new Volkswagen Audi models.
Procedure for resetting the airbag system after a fault or repair.
Enables or disables the Sensotronic Brake Control (SBC) system.
Service function for Audi models related to the oxygen (O2) sensor.
Service function for VW models related to the oxygen (O2) sensor.
Calibrates the electronic throttle body for optimal performance.
Calibrates the tilt angle sensor, often related to ESP or steering systems.
Adjusts the display contrast for better readability.
Sets the preferred unit of measurement for display values (e.g., Metric/English).
Performs diagnostic tests on the tool's display and keypad.
Tests the functionality and display output of the scan tool's screen.
Tests the responsiveness and functionality of the scan tool's buttons.
Instructions for installing the necessary hardware driver on a computer.
Guide on how to use the PC software for updating the scanner's firmware or data.
