Veho KUZO User Manual

EN
11
If a notication appears requesting permission to connect to the watch, press ‘Allow’.
If a Bluetooth pairing request appears press ‘Pair’ to connect devices.
Note: If the smartwatch was previously paired to the device, it must rst be forgotten
from Bluetooth settings.
1. Open the Veho Kuzo app and select ‘Register here’.
2. Enter your email address and input a 6-20 character
password. Conrm this password, read and agree to the
user and privacy policies, then select ‘Register and log in’
to proceed.
3. Complete the personal information elds, and select ‘Finish’
to complete your account. Providing accurate information will
allow for the most accurate data.
4. Swipe through the user guide pages and select ‘Finish’ to
enter the app.
5. Select the ‘Device’ tab then click ‘Add device’.
6. Select ‘Veho Kuzo F1-S’ from the drop-down list, then press
the green tick on the watch to conrm pairing.
7. Select a device language, and select ‘Conrm’ to proceed.
Pairing to your device
6
10
Watch the Kuzo pairing step by step guide on YouTube
https://youtu.be/XufQSWYmFYE

Veho KUZO Specifications

General

Water Resistance	IP67
SIM Card Support	No
Camera	No
Compatibility	Android and iOS
Sensors	Accelerometer