F4.4 WEIGHT DATA FORMAT
0 Displayed Weight only
1 Single Line Gross, Tare, Net
2 Multiple Line Gross, Tare, Net
3 Status, Weight, and Tare
F4.5 FRONT PANEL SET UP ENABLE
d Disable Front Panel Set Up/Calibration.
E Enable Front Panel Set Up/Calibration by holding down the PRINT and
UNITS keys for at least 15 seconds then releasing (Non HB44.)
F5.0 WEIGHT UNITS
0 Pounds unit of measure only.
1 Kilograms unit of measure only.
2 Lb/kg front panel switchable via the UNITS key.
F5.1 INCREMENT SIZE
Least significant digit increment size.
Options: 1, 2, 5, 10, 20, 50, 100
F5.2 DECIMAL POSITION
Display decimal position from none to four places to the left.
0 No decimal.
1 XXXXX.X
2 XXXX.XX
3 XXX.XXX
XX.XXXX
To Next Page
Loading...