47
Cleaning and Care
Seat and backrest
When cleaning the cushions, please follow the instructions below:
• Clean the seat and backrest with a cloth moistened with hot water. Do not soak the seat and backrest.
• Use sensitive, commercially available detergents to remove dirt.
• Stains can be removed with a sponge.
• Do not use strong cleaning liquids, such as solvents or hard brushes.
• Never clean with steam and / or pressure equipment.
The manufacturer is not responsible for damage caused by use of unsuitable cleaning products.
Plastic parts
All plastic parts of the scooter should be cleaned with commercially available cleaners for plastics.
Use only soft brushes or sponges. Please read the information on the product.
Electronic parts
The steering module should be wiped with a cloth moistened with a few drops of household detergent available
for sale. Do not use abrasive or pointed polishing tools, such as a wire brush or a metal brush, as they may scratch
the surface of the steering module. Be careful not to wet the electronic components with water
To Next Page
Loading...
