EasyManua.ls Logo

Velleman Instruments HPS40 User Manual

Velleman Instruments HPS40
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PersonalScope
PersonalScopePersonalScope
PersonalScope
HPS40
Technical Doc
14/02/2003
©
Question and Answer IconNeed help?

Do you have a question about the Velleman Instruments HPS40 and is the answer not in the manual?

Velleman Instruments HPS40 Specifications

General IconGeneral
TypeHandheld Oscilloscope
Channels2
Resolution8-bit
Sample Rate40 MS/s
Input Impedance1 MΩ
Trigger ModesNormal, Single
Power SupplyRechargeable Li-ion battery or USB power
Input Voltage Range100 V (DC + AC peak)
Battery Life6 hours continuous use

Summary

Declaration of Conformity

Test and Calibration

Calibration Procedure - Step 1

Step 1: Low Level Transient Calibration

Calibrates the low-level transient response of the device.

Calibration Procedure - Steps 2-5

Step 2: High Level Transient Calibration

Calibrates the high-level transient response of the device.

Step 3: AD/DC Signal Test

Performs an AD/DC signal test for calibration.

Steps 4-5: Voltage Calibration

Calibrates 1V/div and 0.2V/div settings.

Calibration Procedure - Steps 6-9

Steps 6-7: Voltage Calibration

Calibrates 0.5V/div and 0.1V/div settings.

Steps 8-9: Voltage Calibration

Calibrates 50mV/div and 2V/div settings.

Calibration Procedure - Steps 10-12

Steps 10-11: Input Transient Calibration

Calibrates input transient response for probe and scope.

Specifications