POWERPOD CONTROL BUTTON AND STATUS LIGHT
The PowerPod has one control button and one status light.
Each time you click the button the light will turn on and indicate the
operating status of your PowerPod. After about 8 seconds the status light
will turn off. For some modes (charging and auto-calibration) the status
light will flash continuously.
The status light has three different colors: RED, YELLOW, and GREEN.
Also, depending on PowerPod status, the light will either FLASH, or remain
on continuously (SOLID).
For example, the status light FLASHES RED continuously whenever the
PowerPod is connected to a USB charger and its battery is being charged.
The status light goes out when the battery is fully charged.
To Next Page
Loading...
Need help?
General
