Need help?Do you have a question about the VeloFox DM 06 and is the answer not in the manual?
General| Brand | VeloFox |
|---|---|
| Model | DM 06 |
| Category | Fitness Equipment |
| Language | English |
Identifies the product name and model number (DM06).
Provides a general overview of the IPS display for e-bikes.
Specifies that the display is suitable for e-bikes complying with EN15194.
Describes the materials, design, and dimensions of the display unit.
Explains the format and meaning of product coding and serial numbers.
Lists technical specifications like power supply, resolution, and operating temperature.
Summarizes the main functionalities and features of the DM06 display.
Details the mounting process, handlebar sizes, and tightening torque.
Describes the boot interface and basic operational display screens.
Explains the layout and interaction of the display's basic interface.
Introduces various function interfaces like riding data and battery status.
Details battery information, riding mode usage, and power output analysis displays.
Explains the interface and operation for the walk assist function.
Describes the display's notification system for bike maintenance.
Shows how error codes are displayed and interpreted on the screen.
Guides users on accessing and navigating the display's setting menus.
Identifies each button and its primary functions.
Explains the behavior of buttons based on short press and long press actions.
Provides instructions for powering the display on and off.
Details how to change the power assist levels using the display buttons.
Explains how to cycle through different information displays on the screen.
Describes the automatic and manual control of the display's light function.
Explains the setup and function of the maintenance reminder alert.
Details how to activate and use the walk assist feature.
Explains how battery status and power output are displayed.
Provides notes and troubleshooting for the battery indicator function.
Outlines the various parameter settings available on the display.
Instructions for setting the current time on the display.
Configuration options for the bike maintenance reminder.
How to adjust the screen backlight brightness.
Setting the display's automatic power-off duration.
Details on setting a password for the display.
Describes how to view system information like firmware version.
How to access and interpret battery status details.
Information related to the connected controller, such as hardware version.
Details advanced configuration options requiring specific passwords and technical knowledge.
Instructions for restoring the display to its default factory settings.
How to configure the wheel diameter parameter for accurate readings.
Setting the maximum speed limit for the e-bike system.
Options for customizing the display of the Pedal Assist System (PAS) mode.
Configuring the available levels for the Pedal Assist System.
Setting the number of magnets detected by the speed sensor.
Adjusting the magnet count for power assist detection.
Setting the direction for the power assist sensor signal.
Configuring the slow-starting behavior of the motor.
Setting the number of poles for the power assist magnet.
Adjusting the maximum current limit for the controller.
Selecting the system voltage for the e-bike.
Configuring the low voltage cutoff threshold for protection.
Instructions for removing trip data, average speed, and max speed.
Details error codes, descriptions, and suggested troubleshooting actions.
Provides details on standard wire connections and pinouts for the display.
Pinout and function definition for the Adaptor-C2H connection.
To Next Page