Do you have a question about the Velux ACTIVE with NETATMO and is the answer not in the manual?
Connectivity | Wi-Fi |
---|---|
Operating Temperature | 0°C to 40°C |
Included Components | Indoor climate sensor, departure switch, gateway |
Compatibility | VELUX INTEGRA roof windows, blinds, and shutters |
Control | Automatic and manual control via app |
Sensors | Temperature, humidity, CO2 |
Integration | Apple HomeKit |
Voice Control | Yes, via Apple HomeKit |
Communication Protocol | Wi-Fi |
Power Source (Indoor Climate Sensor) | Battery-powered |
Power Source (Departure Switch) | Battery (CR2032) |
Humidity Range | 0% to 99% |
Functionality | Automated window control, climate monitoring |
Power Supply | Battery (CR2032 for sensors), Mains power for gateway |
App Control | Yes, via Velux ACTIVE with NETATMO app |
Read instructions carefully before installation and operation. Keep for future reference and to any new user.
For indoor and dry environment use only. Children must not play. Caution: Risk of Explosion if battery replaced incorrectly.
Check sensor operation before fixing. Based on two-way RF communication. Specs: radio band, power, range.
Minimal maintenance required. Surface clean with soft, damp cloth. Disconnect power before service.
Tested and found to comply with Class B digital device limits per FCC rules. Limits provide protection against harmful interference.
Complies with FCC RF exposure limits for uncontrolled environment. Minimum 20cm distance between radiator and body.
Complies with Industry Canada license-exempt RSS standards. Operation subject to two conditions.
Adequate fire resistance and low smoke characteristics. Suitable for building environmental air space.
Indoor Climate Sensor: FCC ID XSG-831592, IC 8642A-831592.