Velux INTEGRA KLI 312 - Group Control Setup with Master KLI 110; Preparing Products for Group Registration; Registering the Master KLI

18 VELUX
®
VELUX
®
19
Set-up of products for group control by one master KLI 110 (a)
Important: All KLI must be the same model or the universal KLI 310.
1
Prepare each of the selected products for registration by pressing
each of their KLI Wheel buttons for 1 second.
The products will start running briefly back and forth.
2
Press Rectangle button on the master wall switch KLI for 1 second.
All products are now controlled simultaneously by the master wall
switch (a).
Repeat the procedure for products failing set-up and for adding ad-
ditional products.
a
a
a
1 2
1 sec1 sec