20 VELUX
Back
Enter
Menu
Locate
P1
P2
Keep Edit
P1
P2
Time and date
Time and date must be set the first time the remote
control is to be used as correct settings are required for
remote programming functions. Time must be changed
manually at the start and end of Daylight Saving Time.
The time and date format can be set in item 5 by choosing
"Set format".
The example shows how to set the time. The date is set
correspondingly by choosing "Date" in item 4.
1
Press "Menu".
2
Scroll through the menus:
3
The display shows day, date and time.
• Press
"Keep" to confirm the setting.
• Press "Edit" to change day, date or time.
4
Press to highlight "Clock".
Press "Enter" to confirm your choice.
To Next Page
Loading...
