44 VELUX
Menu
Locate
Select
P1
P2
Back
Enter
Back
P1
P2
P1
P2
BackEnter
Shortcut P1/P2
A program under Shortcut P1/P2 contains a sequence
of operating commands for one or more products. The
sequence is activated by pressing shortcut key P1 or P2.
You can record up to eight programs, four under each of
the shortcut keys. The programs can be set to be execut-
ed immediately, with a delay or at a certain time.
The example shows how to program skylight No. 1 (indi-
cated as "Window" in the remote display) in Room 1 to
open immediately and close again after 1 hour and
30 minutes (delay) by a single pressure on shortcut key P1.
1
Press "Menu".
2
Scroll through the menus:
3
The display shows a list of areas.
Press to highlight "Room 1".
Press "Enter" to confirm your choice.
4
The display shows a list of the product types.
Press to highlight skylights (indicated as "Window").
Press "Enter" to confirm your choice.
5
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press "Select" to select the product.
To Next Page
Loading...
