64 VELUX
A B
Copying to a remote control in operation
If you have two remote controls with dierent products
registered, you can copy the contents from one to the
other so that the latter becomes an exact copy including
all personal settings such as Names, Rooms and Groups.
Step 1: Change security key in remote controls A and B
Change the security key in both remote controls so that
they have the same key, see section Security key.
Step 2: Reset remote control B
Reset remote control B, see section Resetting the remote
control.
Step 3: Copy from remote control A
Copy the contents from remote control A as described in
section Copying to a new remote control.
Note: Before making an exact copy of remote control A,
consider adding products from remote control B to
remote control A as described in step 2 in section Adding
products to a remote control in operation.
To Next Page
Loading...
