VELUX 65
A B
If you have two remote controls with dierent products
registered, you can add the missing products in both.
Then all products can be operated with one or both
remote controls.
The example shows how to add the products from remote
control A to remote control B and at the same time
maintain the settings and the programs of both remote
controls.
Step 1: Change security key in remote controls A and B
Change the security key in both remote controls so that
they have the same key, see section Security key.
Step 2: Register the products in remote control B
Register all products in remote control B by choosing:
If in doubt, see section Registering new products.
Remote control B can now operate all the products. To
make remote control A operate all the products as well,
repeat step 2 with remote control A.
Note: With the shown procedure, only products are
added.
Adding products to a remote control in operation
To Next Page
Loading...
