To Next PageTo Next Page
Need help?Do you have a question about the Velvet Drive 71C and is the answer not in the manual?
General| Brand | Velvet Drive |
|---|---|
| Model | 71C |
| Category | Microphone system |
| Language | English |
Presents maintenance instructions for the Velvet Drive V-Drive marine transmissions.
Presents information of value to maintenance personnel familiar with hydraulic transmissions.
The following international symbols are used in this service manual.
THIS SYMBOL WARNS OF POSSIBLE PERSONAL INJURY.
This symbol warns of possible damage to the transmission.
The following symbols and abbreviations are used:
United States standard units of measure are used in this manual.
A Reader's Comment Card is located in the back of this manual.
The transmission, cooler, cooler lines, and control linkage should be inspected at regular intervals.
WARNING: FAILURE TO PERFORM THESE INSPECTIONS AT REQUIRED INTERVALS CAN RESULT IN INJURY TO PERSONNEL OR PREMATURE FAILURE OF TRANSMISSION.
Transmission maintenance normally requires performing the following tasks.
Any automatic transmission fluid (ATF) which meets the C-3 oil specification is recommended.
Before troubleshooting the transmission, check the following:
Perform all pressure checks at normal operating temperature.
The Illustrated Parts List is a breakdown of assemblies, subassemblies, and detail parts of the 71C and 72C transmission.
Obtain the index number assigned to the item(s) required from the illustration.
The V-Drive gearbox is mounted on the back of a 71C or 72C transmission.
Refer to page 12 for general maintenance procedures on V-Drive gearboxes.
