Vemus Kilitronik miniK 10 - Service Password; Master Password

Page 6
SERVICE PASSWORD: By default, service password is not active. Activate with
Program 5.1. Service password allows lock to be opened only and none of lock
features can be programmed.
• OPENING WITH SERVICE PASSWORD: Default <1-0-1-0-1>
If service password function is active, 1) press button and enter current
5-digit service password and press button. 2) Rotate handle within 5 second
to opening direction. You will get a conrmation beep from lock and green LED
light will blink.
• CHANGING SERVICE PASSWORD:
When you have selected service password in program menu, press button
twice and enter current 5-digit service password. Press button again and
enter new 5-digit service password. Press button again and approve new
password. You will get a conrmation beep from lock and green LED lights will
blink.
• MASTER PASSWORD: Opens lock and grants access to all programming
features.
OPENING WITH MASTER PASSWORD: Default <1-0-1-0-1-0>
1) Press the button and enter current 6-digit master password and press
button. 2) Rotate handle within 5 seconds to opening direction. You will get a
conrmation beep from lock and green LED light will blink.
• CHANGING MASTER PASSWORD: Set new master password and test BE-
FORE installing lock. Press button twice, and then enter old 6-digit master
password. Press button again and enter new 6-digit master password. Press
button again and approve new password. You will get a conrmation beep
from lock.
SERVICE PASSWORD
MASTER PASSWORD
OLD SERVICE NEW SERVICE