280 Size
FPV Racer
●Fully Assembled: No building or firmware loading
necessary!
●On-Screen Display (OSD): Program or set up your
Vengeance on-the-y, no computer needed.
●In-Flight-Adjustable Single-Axis Camera Gimbal, Self-
leveling during ight.
●Vibration Dampened Second-Camera Mount.
●Robust, Pure Carbon-Fiber Frame with Carbon
Exoskeleton Reinforcements.
●Stress-Flex Designed to Withstand Impacts, Mass
centralized for high-rate turning.
●Black-Anodized, High-Strength CNC Aluminum Boom
Mounts.
●Tough, Translucent Polymer Landing Legs with Built-in
Directional Red-Green LED.
●8°Forward-Tilt Motor Mounts for Aerodynamic
Efciency and Top Speed Performance.
●Four 2204, 2300Kv High-Output Brushless Motors.
●Custom Compact BL-Heli 20A Motor Controllers (ESC).
●Visual LED Flight Mode Indicator. Easy to conrm your
ight mode.
●Pre-loaded with Three Flight Modes: Normal, Altitude
Hold, or Acro Mode.
●NAZE Spec 32 Bit Flight Controller 7DOF (with
BMP sensor).
●Altitude Hold via Integrated Barometric Pressure
Sensor (BMP).
●3S and 4S Battery Compatible. Hyperion G6 HV
LiPo Suggested.
●5.8GHz Auto-Scan 40CH Video Transmitter
(VTX) w/ Race Band VTX selectable for either
25mw/200mw output.
●Tuned 5.8GHz CloverLeaf Skew-Planar Antenna.
●Plug-n-Play Ready for Optional GPS modules.
●Built-in Low-voltage Audible Alarm.
●Compatible with Single Wire* or Traditional
Receivers (*S-Bus, Horizon Spektrum™ Satellite, or
Hyperion Compatible receivers).
●Box includes Carry Handle and Foam Racer
Cradle + Parts Holder, for service as eld case.
●One Set 6x4 CC/CCW Propellers Included.
To Next Page
Need help?
General